4095 TRANSMISSION & HYDRAULIC CONDITIONER

4095 TRANSMISSION & HYDRAULIC CONDITIONER
 
MATERIAL SAFETY DATA SHEET
U.S. Department of Labour, Occupational Safety & Health Administration (Non-mandatory Form)
Form approved by OMB No. 1218-0072
SECTION 1  
   
   
   
   
   
   
Identity: 4095 Transmission & Hydraulic Conditioner
   
Chemical Family: Petroleum
   
Trade Name: Chornco
   
SECTION 2 HAZARDOUS / TOXIC INGREDIENTS  
   
Not applicable Non-hazardous as defined by 29 CFR 1915.2 (s)
   
SECTION 3 PHYSICAL DATA  
   
Appearance & Odour Light red, oily liquid.
   
Specific gravity (H20 = 1): 0.90
   
Boiling Point: 300°C, 572°F
   
Melting Point: N/A
   
Solubility in Water: Very Slight
   
Evaporation Rate (Butyl Acetate): 0.50
   
SECTION 4 FIRE AND EXPLOSION HAZARD DATA  
   
Flash Point: 122°F, 50°C C.O.C.
   
Flammable Limits: Not Determined
   
Extinguishing Media: Any UL approved Class B media such as foam, CO2, or dry chemical.
   
Special Fire & Explosion Hazards: None, when handled and stored properly. Keep away from open flame. Cool Conditioner.
   
SECTION 5 REACTIVE DATA  
   
Stability: Stable. Avoid temperature greater than 100°C, 212°F.
   
Incompatibility: Strong oxidising agents.
   
Hazardous Polymerization: Will not occur.
   
Hazardous Decomposition or By-product: None, heavy smoke.
   
SECTION 6 HEALTH HAZARD DATA  
   
General: Eyes - Can Cause irritation, redness, tearing, blurred vision
  Skin - Prolonged or repeated contact can cause irritation dermatitis, defatting.
  Swallowing - Can cause gastrointestinal irritation, nausea, vomiting, and diarrhea.
   
Carcinogenicity: Not determined
   
Signs & symptoms of exposure: Prolonged exposure may cause dermatitis.
   
Medical conditions generally aggravated
by exposure:
Not known
   
First Aid Procedures: Eye contact - immediately flush with water for 15 minutes, call physician.
  Skin contact - wash with soap and water.
  Swallowing - induce vomiting, call physician.
   
SECTION 7 PRECAUTIONS FOR SAFE HANDLING AND USE  
   
Steps to be taken in case material is released or spilled: Handle as an oil spill. Soak up with oil absorbent material and dispose according to local, state, and federal regulations.
   
Waste Disposal Method: Dispose according to Resource Conservation & Recovery Act. Follow local, state, and federal regulations.
   
Handling & Storage: Do not store at elevated levels.
   
SECTION 8 CONTROL MEASURES  
   
Respiratory Protection: Not required
   
Ventilation: Local exhaust preferred. Special - not required
   
Eye Protection: Use safety goggles.
   
Protective Gloves: Oil resistant recommended.
   
Work / Hygienic Practices: Wash hands after handling. Change clothes if spilled on clothes.
   
   
Comments or Suggestions? info@newfueltech.com