|
4055HD OIL CONDITIONER
|
| |
|
MATERIAL SAFETY DATA SHEET
|
|
U.S. Department of Labour, Occupational Safety
& Health Administration (Non-mandatory Form)
|
|
Form approved by OMB No. 1218-0072
|
| SECTION 1 |
|
| |
|
| |
|
| |
|
| |
|
| |
|
| |
|
| Identity: |
4055 Oil Conditioner |
| |
|
| Chemical Family: |
Petroleum |
| |
|
| Trade Name: |
Chornco |
| |
|
| SECTION 2 HAZARDOUS / TOXIC
INGREDIENTS |
|
| |
|
| |
Petroleum Oil Solution, N.O.S. (UN#1993)(Class 3) |
| |
|
| SECTION 3 PHYSICAL DATA |
|
| |
|
| Appearance & Odour |
Green Liquid, Pungent Odour |
| |
|
| Specific gravity: |
0.89 |
| |
|
| Boiling Point: |
250°C, 482°F |
| |
|
| Melting Point: |
N/A |
| |
|
| Solubility in Water: |
Very Slight |
| |
|
| Evaporation Rate (Butyl Acetate): |
< 1 |
| |
|
| SECTION 4 FIRE AND EXPLOSION
HAZARD DATA |
|
| |
|
| Flash Point: |
120°F, 49°C C.O.C |
| |
|
| Flammable Limits: |
Not Determined |
| |
|
| Extinguishing Media: |
Any UL approved Class B media such as foam, CO2,
or dry chemical. |
| |
|
| Special Fire & Explosion Hazards: |
None, when handled nd stored properly. Keep away from open
flame. Treat as oil fire. |
| |
|
| SECTION 5 REACTIVE DATA |
|
| |
|
| Stability: |
Stable. Avoid temperature greater than 100°C, 212°F. |
| |
|
| Incompatibility: |
Strong oxidising agents. |
| |
|
| Hazardous Polymerization: |
Will not occur. Heavy smoke. |
| |
|
| SECTION 6 HEALTH HAZARD DATA |
|
| |
|
| General: |
Eyes - Can Cause irritation, redness, tearing, blurred vision |
| |
Skin - Prolonged or repeated contact can cause irritation
dermatitis. |
| |
Swallowing - Can cause gastrointestinal irritation, nausea,
vomiting, and diarrhea. |
| |
|
| Health Hazards: |
Change clothes if spilled on clothes. Use safety goggles for
eye protection. Respiratory protection not required. |
| |
Protective gloves recommended. |
| |
|
| First Aid Procedures: |
Eye contact - immediately flush with water for 15 minutes,
call physician. |
| |
Skin contact - wash with soap and water. |
| |
Swallowing - induce vomiting, call physician. |
| |
|
| SECTION 7 PRECAUTIONS FOR
SAFE HANDLING AND USE |
|
| |
|
| Steps to be taken in case material is released
or spilled: |
Handles as an oil spill. Soak up with oil absorbent material
and dispose according to local, state, and federal regulations. |
| |
|
| Waste Disposal Method: |
Dispose according to Resource Conservation & Recovery
Act. Follow local, state, and federal regulations. |
| |
|
| Handling & Storage: |
For long storage period do not store at temperatures above
100°C, 212°F. |
| |
|
| SECTION 8 CONTROL MEASURES |
|
| |
|
| Respiratory Protection: |
Not required |
| |
|
| Ventilation: |
Local exhaust preferred. Special - not required |
| |
|
| Eye Protection: |
Use safety goggles. |
| |
|
| Protective Gloves: |
Oil resistant recommended. |
| |
|
| Work / Hygienic Practices: |
Wash hands after handling. Change clothes if spilled on clothes. |
|
