2082 Fuel Conditioner
Chornco 2082 is our flagship fuel additive. By reducing the surface tension of the fuel it changes the behavior of both Diesel and Petrol.
The modified fuel injects with a finer mist, which translates into a cleaner burn, less waste, and more power/efficiency from the same amount of fuel.
You can choose to run your engine cooler/lower revs with the same power output for maintenance and fuel savings, or take advantage of the additional power at the old rate of combustion. Chornco 2082 is not an octane booster. 2082 is organic and non-toxic. In addition to the benefit during combustion, 2082 also allows fuel contaminates and particulates to remain suspended and exit the tank into the filtration process. As long as your filters can keep up with the load, 2082 will actually clean out your tank.
As yet another benefit, fuel dosed with 2082 becomes inhospitable to fuel bug. The bug dies, remains in suspension and is removed from the tank as it breaks down. As long as your fuel filters are up for it, the bug will be killed and removed with no additional effort. If your tanks are particularly dirty or contaminated, please consult with your engineer before dosing and consider having additional filters on hand. Once the tank is clean, filter use returns to traditional levels.
If you have any questions about 2082, please give us a ring. 2082 has been called "snake oil" and "voodoo juice" by skeptics, but the biggest cynics have become some of our most loyal customers. If our testimonial videos still don't convince you, please try it for yourself. It really does work. The increase in efficiency is real. Whether you choose to turn that into a fuel savings with less pollution or additional power is up to you.
Thanks,
Ralph Stark
Senior Product Representative
021 586 877
|
2082 DIESEL FUEL CONDITIONER
|
| |
|
MATERIAL SAFETY DATA SHEET
|
|
U.S. Department of Labour, Occupational Safety
& Health Administration (Non-mandatory Form)
|
|
Form approved by OMB No. 1218-0072
|
| SECTION 1 |
|
| |
|
| |
|
| |
|
| |
|
| |
|
| |
|
| Identity: |
2082 Fuel Conditioner |
| |
|
| Chemical Family: |
Petroleum |
| |
|
| Trade Name: |
Chornco |
| |
|
| SECTION 2 HAZARDOUS / TOXIC
INGREDIENTS |
|
| |
|
| Not applicable |
Non-hazardous as defined by 29 CFR 1915.2 (s) |
| |
|
| SECTION 3 PHYSICAL DATA |
|
| |
|
| Appearance & Odour |
Light Brown, oily liquid |
| |
|
| Specific gravity (H20 = 1): |
0.92 |
| |
|
| Boiling Point: |
400°C, 752°F |
| |
|
| Melting Point: |
N/A |
| |
|
| Solubility in Water: |
Negligible |
| |
|
| Evaporation Rate (Butyl Acetate): |
< 1 |
| |
|
| Vapor Pressure (mm Hg) |
< 1 |
| |
|
| Vapor Density (air = 1) |
> 1 |
| |
|
| SECTION 4 FIRE AND EXPLOSION
HAZARD DATA |
|
| |
|
| Flash Point: |
288°F 138°C C.O.C. |
| |
|
| Flammable Limits: |
Not Determined |
| |
|
| Extinguishing Media: |
Any UL approved Class B media such as foam, CO2,
or dry chemical. |
| |
|
| Special Fire & Explosion Hazards: |
None, when handled and stored properly. Keep away from open
flame. Treat as oil fire. |
| |
|
| SECTION 5 REACTIVE DATA |
|
| |
|
| Stability: |
Stable. Avoid temperature greater than 75°C, 167°F. |
| |
|
| Incompatibility: |
Strong oxidising agents. |
| |
|
| Hazardous Polymerization: |
Will not occur. |
| |
|
| SECTION 6 HEALTH HAZARD DATA |
|
| |
|
| General: |
Eyes - Can Cause irritation, redness, tearing, blurred vision |
| |
Skin - Prolonged or repeated contact can cause irritation
dermatitis. |
| |
Swallowing - Can cause gastrointestinal irritation, nausea,
vomiting, and diarrhea. |
| |
|
| Health Hazards: |
Not toxic. Not a primary skin irritant. Mild eye irritant. |
| |
|
| Carcinogenicity: |
Not determined |
| |
|
| Signs & symptoms of exposure: |
Prolonged exposure may cause dermatitis. |
| |
|
Medical conditions generally aggravated
by exposure:
|
Not known |
| |
|
| First Aid Procedures: |
Eye contact - immediately flush with water for 15 minutes,
call physician. |
| |
Skin contact - wash with soap and water. |
| |
Swallowing - induce vomiting, call physician. |
| |
|
| SECTION 7 PRECAUTIONS FOR
SAFE HANDLING AND USE |
|
| |
|
| Steps to be taken in case material is released
or spilled: |
Handle as an oil spill. Soak up with oil absorbent material
and dispose according to local, state, and federal regulations. |
| |
|
| Waste Disposal Method: |
Dispose according to Resource Conservation & Recovery
Act. Follow local, state, and federal regulations. |
| |
|
| Handling & Storage: |
For long storage period do not store at temperatures below
60°F. |
| |
|
| SECTION 8 CONTROL MEASURES |
|
| |
|
| Respiratory Protection: |
Not required |
| |
|
| Ventilation: |
Local exhaust preferred. Special - not required |
| |
|
| Eye Protection: |
Use safety goggles. |
| |
|
| Protective Gloves: |
Oil resistant recommended. |
| |
|
| Work / Hygienic Practices: |
Wash hands after handling. Change clothes if spilled on clothes. |
|
| |
|
Comments or Suggestions? info@newfueltech.com
|
|