1040 Residual/Bunker Fuel Conditioner

1040 RESIDUAL/BUNKER FUEL CONDITIONER
 
MATERIAL SAFETY DATA SHEET
U.S. Department of Labour, Occupational Safety & Health Administration (Non-mandatory Form)
Form approved by OMB No. 1218-0072
SECTION 1  
   
   
   
   
   
   
Identity: 1040 Residual/Bunker Fuel Conditioner
   
Chemical Family: Petroleum
   
Trade Name: Chornco
   
SECTION 2 HAZARDOUS / TOXIC INGREDIENTS  
   
Specific Chemical Identity/Hazardous Components:
Organic Nitrogen Compound, Dispersant for Fuel Oils
   
  Non hazardous components
   
SECTION 3 PHYSICAL DATA  
   
Appearance & Odour Dark Amber Liquid. Pungent
   
Specific gravity (H20 = 1): 0.93
   
Boiling Point: 3 25°F
   
Melting Point: -22
   
Solubility in Water: Insoluble
   
Evaporation Rate (Butyl Acetate): N/A
   
Vapor Pressure (mm Hg) N/A
   
Vapor Density (air = 1) > 1
   
SECTION 4 FIRE AND EXPLOSION HAZARD DATA  
   
Flash Point: > 155°F C.O.C.
   
Flammable Limits: Not available. LEL =Unknown UEL = Unknown
   
Extinguishing Media: Use water fog, foam, dry chemical or carbon dioxide (CO2)
   
Special Fire & Explosion Hazards: Cool container or storage tanks using above listed extinguishing media
   
Unusual Fire and Explosion Hazards Should be stored away from excessive heat or open flame.
   
SECTION 5 REACTIVE DATA  
   
Stability: Stable. Avoid open flame
   
Incompatibility: Avoid strong oxidising agents.
   
Hazardous Decomposition or Byproducts: Thermal decomposition or buring may product nitrogen and oxides of carbon
   
Hazardous Polymerization: Will not occur.
   
SECTION 6 HEALTH HAZARD DATA  
   
Routes of Entry: Eyes and/or skin
   
Health Hazards: Contact may cause eye irritation. Avoid contact. This product is not expected to be a primary skin irritant buy prolonged or repeated contact should be avoided.
   
Carcinogenicity: Not listed
   
Signs & symptoms of exposure: Prolonged exposure may cause dermatitis.
   
Medical conditions generally aggravated
by exposure:
Not known
   
First Aid Procedures: Eye contact - immediately flush with water for 15 minutes, call physician.
  Skin contact - wash with soap and water.
  Swallowing - Do not induce vomiting, call physician.
   
SECTION 7 PRECAUTIONS FOR SAFE HANDLING AND USE  
   
Steps to be taken in case material is released or spilled: Material may be absorbed with saw dust, rags or available petroleum oil absorbents. Final cleanup with soap and water.
   
Waste Disposal Method: Chemical waster disposal is governed by Resources Conservation and Recovery Act. Follow Federal, State and local regulations
   
Handling & Storage: Store at temperatures below 65?C (149?F). Observe normal hygienic and Safety precautions when handling chemicals.
   
SECTION 8 CONTROL MEASURES  
   
Respiratory Protection: Use NIOSH/MSHA approved respirators
   
Ventilation: Local Exhaust – Recommended
   
Mechanical: Recommended in confined spaces
   
Eye Protection: Safety glasses with side shields when handling in manufacturing
   
Protective Gloves: Oil resistant recommended.
   
Other Protective Clothing or equipment: None
   
Work / Hygienic Practices: Avoid contact with the eyes. Avoid prolonged or repeated contact with the skin. Wash hands thoroughly after handling.
   
Comments or Suggestions? info@newfueltech.com